Curing Characteristics and Tear Properties of Bentonite Filled Ethylene Propylene Diene (EPDM) Rubber Composites

The effect of bentonite clay loading on curing characteristics and tear strength of bentonite filled ethylene propylene diene monomer (EPDM) composite were studied. Compounding was carried out on two-roll mill and vulcanization was done at 150⁰C. Torque values, scorch time and optimum cure time of the prepared rubber compound were assessed by using Mosanto Disc Rheometer (MDR 2000). Results indicated that the maximum torque of EPDM/Bt composite decreases at high bentonite loading. Increasing in values with increasing bentonite loading was recorded for minimum torque and optimum cure time of EPDM/Bt composite. The increase is related with the increase in viscosity due to the increasing of bentonite clay loading in EPDM matrix. Scorch time was found to be decreasing up to 30 phr bentonite clay. Results also show that tear strength of EPDM/Bt composite increased with increasing bentonite loading up to 90 phr. The reason is probably due to agglomeration occur causes the reduction in properties at high loading above 90 phr bentonite clay. The scanning electron microscopy (SEM) of tear fracture surface of EPDM/Bt composite illustrated that with increasing bentonite loading up to 90 phr bentonite clay, a better dispersion of bentonite clay is achieved as compared to lower loading, resulting in high tear strength value for EPDM/Bt composite.     

Matrimid–polyaniline/clay mixed‐matrix membranes with plasticization resistance for separation of CO2 from natural gas

Mixed‐matrix membranes (MMMs) of Matrimid® and polyaniline/clay (PC) are investigated for CO₂/CH₄ separation and CO₂‐induced plasticization. PC particles are synthesized through in‐situ polymerization of aniline in the presence of organophilic clay and then incorporated into Matrimid by solution casting method. Chemical structure and morphology of PC powder and fabricated membranes are analyzed by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), differential scanning calorimetry/thermogravimetric analysis (DSC/TGA) and scanning electron microscopy (SEM). The XRD spectra of PC particles show the exfoliation of silicate layers throughout the polyaniline (PAni) matrix, and SEM images indicate flower‐petal morphology for PC particles. The permeability values of CO₂ and CH₄ increase 30–35% by incorporation of 10 wt% PC without any significant drop in selectivity. PC particles with flower‐petal morphology plays an important role in increasing the gas permeability values of both gases while Matrimid is the only phase that controls CO₂/CH₄ selectivity. The plasticization pressure was increased to 30 bar by incorporation of 10 wt% PC in the Matrimid matrix. CO₂ permeability and p_plast improved 35% and 200%, respectively, resulting in 300% enhancement in the capacity of MMM in the purification of natural gas with a selectivity of about 40. Copyright © 2016 John Wiley & Sons, Ltd.     

Melt rheology of polylactide/montmorillonite nanocomposites

In this article, the linear and nonlinear shear rheological behaviors of polylactide (PLA)/clay (organophilic‐montmorillonite) nanocomposites (PLACNs) were investigated by an Advanced Rheology Expanded System rheometer. The nanocomposites were prepared by master batch method using a twin‐screw extruder with poly(ε‐caprolactone) (PCL) as a compatibilizer. The presence of org‐MMT leads to obvious pseudo‐solid‐like behaviors of nanocomposite melts. The behaviors caused by the formation of a “percolating network” derived from the reciprocity among the strong related sheet particles. Therefore, the storage moduli, loss moduli, and dynamic viscosities of PLACNs show a monotonic increase with MMT content. Nonterminal behaviors exists in PLACNs nanocomposites. Besides the PLACNs melts show a greater shear thinning tendency than pure PLA melt because of the preferential orientation of the MMT layers. Therefore, PLACNs have higher moduli but better processibility compared with pure PLA. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3189–3196, 2007     

Crystallization behavior and thermal stability of poly(trimethylene terephthalate)/clay nanocomposites

Poly(trimethylene terephthalate) (PTT)/montmorillonite (MMT) nanocomposites were prepared by the solution intercalation method. Two different kinds of clay were organomodified with an intercalation agent of cetyltrimetylammonium chloride (CMC). X‐ray diffraction (XRD) indicated that the layers of MMT were intercalated by CMC, and interlayer spacing was a function of the cationic exchange capacity of clay. The XRD studies demonstrated that the interlayer spacing of organoclay in the nanocomposites depends on the amount of organoclay. From the results of differential scanning calorimetric analysis, it was found that clay behaves as a nucleating agent and enhances the crystallization rate of PTT. The maximum enhancement of the crystallization rate for the nanocomposites was observed in nanocomposites containing about 1 wt % organoclay with a range of 1–15 wt %. From thermogravimetric analysis, we found that the thermal stability of the nanocomposites was enhanced by the addition of 1–10 wt % organoclay. According to transmission electron microscopy, the organoclay particle was highly dispersed in the PTT matrix without a large agglomeration of particles for a low organoclay content (5 wt %). However, an agglomerated structure did form in the PTT matrix at a 15 wt % organoclay content. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2902–2910, 2003     

A 100-kW three-phase AC plasma furnace for spheroidization of aluminum silicate particles

A 100-kW three-phase ac plasma furnace with sheathed copper electrodes (sheathing gas: air) is presented. It is used for spheroidizing chamotte (refractory-fired clay) particles having a smooth, pore-free surface. A simple, one-dimensional numerical model for the heat transfer to the particles explains the maximum processing rate and the detrimental influence of an inhomogeneous particle size distribution.     

Characterizations of iron-rich clay modified electrodes and their applications in optical recognition

Optical recognition was studied with modified electrodes based on iron-rich clays. According to energy-dispersive X-ray spectroscopy (EDX), several clay minerals including montmorillonite K10 (mont. K10) contain a lot of iron. Cyclic voltammetry suggested that electrochemically active iron species exist in most iron-rich clays and are likely to reside at different sites. The associated electrochemical activity is strongly pH-dependent and photosensitive. Under UV irradiation (λ ≤ 420 nm), these iron species were activated, and a pronounced photocurrent resulted. When these electrodes were flow-injected with 2-pyridylcarboxylic acids (λ_ab,max = 260 nm), the originally monotonic photocurrent could be modulated into a more recognizable a.c. pattern and the 260 nm optical signal became distinguishable. The photoresponse was highly reproducible, and the response time (t₉₀) was less than 10s.     

Syntheses, characterization and catalytic reactivities of heteropolyanion-pillared clay of anions of Zn-Al type

Mono-substituted Keggin ions PW11O39Cr(H2O)4 , PW11TiO403 and PW11VO404 were intercalated between the layers of the clay of anions of Zn-Al type using the ion exchange method to obtain a new type of pillared layered microporous materials ZnAl-PW11Cr, ZnAl-PW11Ti and ZnAl-PW11V with basal spacing (1.48±0.02) run. On the basis of the MAS NMR results of 27A1 and 31P, a steric pillared layered structure model of orientation localization of PW11VO40,4- in the orientation in which the C2 axis of PW11VO404-is perpendicular to the host layer. It has been found that this kind of pillared layered microporous materials possess a higher catalytic activity for the esterification of acetic acid with n-butanol than H-type molecular sieves.     

The Transformation of Clay Minerals in Triassic Mudstone of North Shaanxi Province During Burial Metamorphism

According to the analysis of X-ray diffraction and the investigation under electron microscope (SEM, TEM) of clay minerals, the transformation of clay minerals in Triassic mudstone during burial metamorphism has been studied in detail. Berthierine, the mixed layer of illite and chlorite, and the changeable texture from berthierine to chlorite have been first discovered in the paper; and then it is considered that the transformation of clay minerals during burial metamorphism is shown in the following reaction: Smectite+ Kaolinite + K~+ = lllite + Chlorite + Quartz. The metamorphic temperature of the above reaction is about 160—220℃, according to the calculation of oxygen isotope geothermometry of illite and quartz. The study of crystallinity and polytype of illite and chlorite shows that the different indexes have varied in regular way, and have certain functional relationship between them.     

杭州 市 区环境工程地质及软土地基稳定性评价

本文着重 对杭 州市环 境工程地 质特 点及其软土 地基稳定性 作出指导性评 价.对加强地下工程建设,城市 总体规划布局,城市详细 规划,单体 建筑设计和 施工,工程地 质勘 察等的宏观控制与微观指导,具有重要意 义